Work Positioning Twisted Rope Lanyard with ring adjuster
Reference : FA4090020
Work Positioning Twisted Rope Lanyard with ring adjuster maximum length 2 mtr with 1 steel screw-locking karabiner and 1 steel snap hook
Work Positioning Twisted Rope Lanyard with ring adjuster
Maximum length : 2 mtr
Connectors : 1 steel screw-locking karabiner FA 50 101 17, 1 steel snap hook FA 50 202 17
Conforms to : EN 358:2018
- Made up of 14 mm diam polyamide twisted rope
- Abrasion resistant thimble to protect the loops from being damaged by metallic contact
- Spliced end is protected with a strong transparent covering sleeve
- Colored tracer strand losing colour to show the lanyard is unfit for use
- Forged alloy steel ring-adjuster
To download the lanyard instructions for use, see the Attachment tab
FA4090020
Data sheet
- Standard(s):
- EN 358:2018
- Material:
- Polyamide
- PPE / NO PPE
- PPE
- Size:
- longueur 2mdiamètre 12mm
- Buckle(s):
- boucles cosséesboucle réducteur
- Connector:
- 1 mousqueton à vis FA 50 101 171 mousqueton automatique à verrouillage automatique double action FA 50 202 17
- HS Code :
- 56090000
- Range
- ESSENTIAL
Specific References
LANYARDS - RESTRAINT & WORK POSITIONING
 | EN354 : Connection elements or parts of a restraint system, these limit the range of movement of a user. Breaking strength > 22 kN
EN358 : A work positioning lanyard allows a user to maintain himself in tension (or in suspension) to a workstation with his hands free. |  |
Use: The lanyards shall provide the worker with maximum security while causing least inconvenience possible to the user
- A restraint lanyard should be used only when you want to prevent a user from accessing an area where there is a risk of falling.
- The Forked lanyards are designed to be used in the same way but for passing intermediate anchor points.
- A work positioning lanyard could be used when there is no risk of falling, otherwise it must be used with a suitable fall arrest
system.
RAPPEL: Lanyards without the energy absorber should never be used as a fall arrest system
How to choose?
|
14 mm Polyamide twisted rope |
30 mm Polyester webbing |
12 mm Polyamide kernmantle rope |
11 mm Polyamide kernmantle rope |
| To be used occasionally and/or for short-term use | To be used regularly and/or for long-term use | ||
Whatever type of lanyard, the performances are identical, so it is above all a personal choice, but it must be based on the intensity of use.
When choosing the product it will be necessary to take into account the importance of connectors
Work positioning lanyard
 Lanyard with a ring type adjuster, used when the operator s position remains the same throughout the work to be done. |  Lanyard with a progressive grip adjuster, used when the operator s position often changes throughout the work to be done. |
To ensure the performance of your lanyard it should be protected with a protective sleeve.SAME CATEGORY PRODUCTS
Work Positioning Twisted Rope Lanyard with ring adjuster maximum length 2 mtr with 1 steel screw-locking karabiner and 1 steel snap hook