D-bolt Anchorage

Reference : FA6001400

D-Bolt Anchorage

Designed to be installed on vertical or horizontal surfaces.

Material : Forged Steel

Diameter: M12.

Length of the threaded rod: 30 mm.

Net weight : 450 gm

Conforms to : EN 795:2012 Type A

Static strength: 12 kN.

Minimum breaking strength : 23 kN

To download the instructions for use, see the Attachment tab

Reference FA6001400

Data sheet

Standard(s):: EN 795:2012 Type A
Material:: Steel
PPE / NO PPE: No PPE
HS Code :: 73269098

Specific References

Download

Latest versions - May differ from the documents delivered with the product or previously received.

• Instructions FA 60 014 00-01
FA 60 014 00, FA 60 014 01
Download

• ENTECH01_anchorages installation
Download

• FT FA 60 014 00-01
FA 60 014 00, FA 60 014 01
Download

• Certificate of Test FA 60 014 00
Download

ANCHORAGES

EN795 : The anchor point is a point where the fall arrest system is safely attached to ensure the security of the user. There are different kinds of anchor points:

Type A	Anchoring device requiring the fixing of one more structural anchors
Type B	Anchoring device not requiring the fixing of one more structural anchors
Type C	Anchor device using horizontal flexible anchor lines
Type D	Anchor device using horizontal rigid anchor lines
Type E	Deadweight anchoring device

Use : There is no good fall arrest system without a good anchorage point. Whatever the type of intervention to achieve and that it is temporary or regular, it is essential to correctly choose its anchor point and verify that the host structure (building, steel structure, tower, ...) is sufficiently resistant.

How to choose ?
The anchor point is undoubtedly the part of a fall arrest system that is tricky to choose to ensure optimum safety. When choosing the anchor point the first thing to do is to determine where to install it.

For this we must take into account the following aspects:

static strength of the anchor point : > 12 kN
installation height: high enough compared to the first potential obstacle in case of a fall (see fall factor diagram)
situation: in the vertical workstation to avoid risks of pendulum effect (see pendulum effect diagram)

We will ensure as far as possible to focus on work situations with a fall factor 0 or 1 and we will avoid if possible installing a fall arrest system on an anchor in fall factor 2, The pendulum effect must also be as small as possible.

FALL FACTOR

Fall Factor 0
Position of the anchor point above the attachment point of the user

Fall Factor 1
Position of the anchor point at the same level as attachment point of the user

Fall Factor 2
Position of the anchor point above the attachment point of theuser

In a representation of space in 3D symbolized this way:

Key:

x = axis right / left

y = axis up / down

z = axis back / front

we created the 4 following pictograms in order to help you understand the direction in which the effort can be applied on our anchor points:
	This anchorage can be used only in a horizontal direction in relation to the installation.	This anchorage can be used only in a vertical direction in relation to the installation.
	This anchorage can be used both in a horizontal and in a vertical direction in relation to the installation.	This anchorage can be used in the 3 directions in relation to the installation.