Rückhalteverbindungsmittel Kernmantelseil 1 m mit FA 5020217 Automatik-Stahlkarabiner und FA 5020755 Gerüsthaken
Rückhalteverbindungsmittel Kernmantelseil
Länge : 1 m
Karabiner : 1 Stahlkarabiner mit doppelt wirkendem Automatikverschluss FA5020217 an einem Ende und 1 Gerüsthaken mit doppelt wirkendem Automatikverschluss FA 50 207 55 am anderen Ende
Bruchfestigkeit : 22 kN
Konformität - zertifiziert nach : EN354:2010
Zolltarif Nummer : 56090000
- aus 12 mm Durchmesser Polyamid Kernmantelseil
- Abriebfeste Kausche um die Schlaufen vor Abrieb durch die Metallkomponenten zu schützen
- mit widerstandsfähiger transparenter Hülle über den vernähten Enden, welche nicht nur die Vernähungen schützen, sondern auch die optische Kontrolle der Vernähungen ermöglichen
Um die Gebrauchsanleitung herunter zu laden siehe Registerkarte Anhänge
LANYARDS - RESTRAINT & WORK POSITIONING
|
EN354 : Connection elements or parts of a restraint system, these limit the range of movement of a user. Breaking strength > 22 kN
EN358 : A work positioning lanyard allows a user to maintain himself in tension (or in suspension) to a workstation with his hands free. Breaking strength > 15 kN.
|
|
Use: The lanyards shall provide the worker with maximum security while causing least inconvenience possible to the user
- A restraint lanyard should be used only when you want to prevent a user from accessing an area where there is a risk of falling.
- The Forked lanyards are designed to be used in the same way but for passing intermediate anchor points.
- A work positioning lanyard could be used when there is no risk of falling, otherwise it must be used with a suitable fall arrest
system.
RAPPEL: Lanyards without the energy absorber should never be used as a fall arrest system
How to choose?
12 mm Polyamide twisted rope
|
30 mm Polyester webbing
|
12 mm Polyamide kernmantle rope
|
44 mm Polyester expandable webbing
|
To be used occasionally and/or for short-term use
|
To be used regularly and/or for long-term use
|
|
30mm webbing
|
12 mm kernmantle rope
|
|
To be used occasionally and/or for short-term use
|
To be used regularly and/or for long-term use |
Whatever type of lanyard, the performances are identical, so it is above all a personal choice, but it must be based on the intensity of use.
When choosing the product it will be necessary to take into account the importance of connectors
Work positioning lanyard
Lanyard with a ring type adjuster, used when the operator's position remains the same throughout the work to be done. |
Lanyard with a progressive grip adjuster, used when the operator's position often changes throughout the work to be done. |
To ensure the performance of your lanyard it should be protected with a protective sleeve.