Restraint Kernmantle Rope Lanyard length 1 mtr with a steel snap hook at one end and a steel scaffold hook at the other end
Restraint Kernmantle Rope Lanyard
Length : 1 mtr
Connectors : 1 steel snap hook FA5020217 at one end and 1 steel scaffold hook FA5020755 at the other end
Breaking strength : 22 kN
Conforms to : EN354:2010
- Made up of 12 mm diam polyamide kernmantle rope
- Abrasion resistant thimble to protect the loops from being damaged by metallic contact
- Sewing protected with a strong transparent covering sleeve which not only protects the end, but also make the stitches visible for easy inspection before the use
To download the lanyard instructions for use, see the Attachment tab
LANYARDS - RESTRAINT & WORK POSITIONING
|
EN354 : Connection elements or parts of a restraint system, these limit the range of movement of a user. Breaking strength > 22 kN
EN358 : A work positioning lanyard allows a user to maintain himself in tension (or in suspension) to a workstation with his hands free.
Breaking strength > 15 kN.
|
|
Use: The lanyards shall provide the worker with maximum security while causing least inconvenience possible to the user
- A restraint lanyard should be used only when you want to prevent a user from accessing an area where there is a risk of falling.
- The Forked lanyards are designed to be used in the same way but for passing intermediate anchor points.
- A work positioning lanyard could be used when there is no risk of falling, otherwise it must be used with a suitable fall arrest
system.
RAPPEL: Lanyards without the energy absorber should never be used as a fall arrest system
How to choose?
|
14 mm Polyamide twisted rope
|
30 mm Polyester webbing
|
12 mm Polyamide kernmantle rope
|
11 mm Polyamide kernmantle rope
|
|
To be used occasionally and/or for short-term use
|
To be used regularly and/or for long-term use
|
Whatever type of lanyard, the performances are identical, so it is above all a personal choice, but it must be based on the intensity of use.
When choosing the product it will be necessary to take into account the importance of connectors
Work positioning lanyard
Lanyard with a ring type adjuster, used when the operator's position remains the same throughout the work to be done. |
Lanyard with a progressive grip adjuster, used when the operator's position often changes throughout the work to be done. |
To ensure the performance of your lanyard it should be protected with a protective sleeve.