HOPE - Y-Verbindungsmittel mit Falldämpfer gedrehtes Seil 1,50 m mit FA 5020217 Automatik-Stahlkarabiner an einem Ende und 2 x FA 5020755 Gerüsthaken an beiden anderen Enden
HOPE - Y-Verbindungsmittel mit Falldämpfer gedrehtes Seil
Sturzanzeige-Etikett:
Überprüfen Sie vor jedem Gebrauch ihr Verbindungsmittel mit Falldämpfer. Wenn das Feld "NOT OK" auf dem Etikett zu sehen ist, bedeutet die, dass Ihr Gerät einen Sturz aufgefangen hat und nicht erneut verwendet werden darf. Ersetzen Sie es durch eine zulässige Ausrüstung.
Länge : 1,50 m
Karabiner : 1 Stahlkarabiner mit doppelt wirkendem Automatikverschluss FA5020217 an einem Ende und 2 Gerüsthaken mit doppelt wirkendem Automatikverschluss FA 50 207 55 an beiden anderen Enden
Konformität - zertifiziert nach : EN355:2002 und nach VG11 der PPE Directive 89/686/EEC geprüft
Zolltarif Nummer : 5609 00 90
- Bandfalldämpfer aus 44 mm breitem Gurtband reduziert bei einem Sturz die Energieeinleitung in den Körper auf unter 6 kN
- aus 12 mm Durchmesser gedrehtem Polyamid-Seil
- Abriebfeste Kausche um die Schlaufen vor Abrieb durch die Metallkomponenten zu schützen
- mit widerstandsfähiger transparenter Hülle über den gespleissten Enden
Um die Gebrauchsanleitung herunter zu laden siehe Registerkarte Anhänge
ENERGY ABSORBER & ENERGY ABSORBING LANYARDS
EN355 :
The energy absorbing lanyards allow to absorbs the energy of fall by tearing of specific webbings or sewings. Maximal length for a energy absorbing lanyard : 2 m including connectors. Breaking strength > 15 kN
Lanyards without the energy absorber should never be used as a fall arrest system.
|
|
Use: To be used only for a work requiring limited movement and where the distance under the feet of the user is sufficient (see Clearance).The forked energy absorbing lanyards are designed to be used for passing intermediate anchor points.
Trades : Construction, Worker on building, Steel construction, Scenic, Scaffolder.
How to choose?
12 mm twisted rope
|
30 mm webbing
|
12 mm kernmantle rope
|
44 mm expandable webbing
|
12 mm special sharp edges kernmantle rope
|
FA 30 000 45 (45 mm) To be used occasionally and/or for short-term use
|
FA 30 000 35 (35 mm) To be used regularly and/or for long-term use
|
Whatever type of lanyard or energy absorber, the performances are identical, so it is above all a personal choice, but it must be based on the intensity of use.
- When choosing the product it is necessary to take into account the importance of connectors (see page 66).
COMPLIANCE WITH VG 11 KRATOS SAFETY launches Energy Absorbing Lanyards tested as per VG 11 from PPE Directive 89/686/EEC
KRATOS SAFETY makes it easier for you to pick the right Energy Absorbing Lanyard tested with all the components of connecting elements in combination, as faced in actual usage.
The VG 11 procedure allows to ensure the breaking strenght of the components (hooks and rope) and their assembly without fearing the breakage of any of the elements.
KRATOS SAFETY Forked Lanyards are also subjected to the special 3-point testing as laid down in the VG 11 Procedure to make the lanyards extra safe for use.
Minimum breaking strenght > 9kN at the 3 ends of the forked lanyard.
|
|
Fall indicator label:
Before each use, inspect your energy absorbing lanyard.
If the "NOT OK" sign is visible on the label, this means your device has arrested a fall and should not be reused. Please replace it by a compliant one.