Anchor line made of polyamide twisted rope for the fall arrester FA 20 100 00B, length 200 metres
FA2010097
Anchor line 200 mtr for fall arrester FA 20 100 00B
- Length of the rope : 200 metres
- Made up of 14-16 mm diameter polyamide twisted rope
- Abrasion resistant thimble to protect the loops from being damaged by metallic contact
- Spliced end is protected with a strong transparent covering sleeve
- Colored tracer strand which loses colour to show the lanyard is unfit for use.
Conforms to : EN353-2:2002To download the fall arrester instructions for use, see the Attachment tab
EN353-1 :
A fall arrester on rigid anchor line is a device that automatically blocks and stops on the vertical support when the user falls. The anchor line can be a cable (rigid) or rail. Breaking strength of these systems> 15 kN.
EN353-2 :
A fall arrester on flexible anchor line is a device that automatically blocks and stops on the vertical support when the user falls. The anchor line can be a cable (flexible) or a rope (twisted or braided). These flexible anchor lines must be weighted with a counterweight. Breaking strength of these systems> 15 kN.
EN360 :
A retractable fall arrester is a device equipped with a lanyard (on cable or webbing) kept in tension. It follows the movements of user. The system blocks and stops automatically when the user falls. These come in different lengths. Breaking strength > 12 kN (for cable lanyard) or > 15kN (for textile lanyard)
|
Whatever the fall arrest system choosen (fall arrester on anchor line, retractable fall arrester, energy absorbing lanyard) it guarantees a fall arrest by limiting the impact on the human body at 6kN maxi. |
|
Use:
Trades: The retractable fall arresters are used instead for the following professions: Works on facade, on the terrace, on scaffolding, on aerial lift, and maintenance..
|
||
|
How to choose ? The choice of the fall arrest system must be based on the movement to perform. Obviously, for the choice of the fall arrest system, the position of the anchor point must be considered. |
|
If the movement is purely vertical (along a scale for example) we always favour a fall arrester on anchor line. They have the advantage of being installed (for some) permanently on the structure. |
If the movement can be horizontal & vertical, we will prefer a retractable fall arrester.
|
|
The fall arrester on anchor line must always be used directly below the anchor point. |
The retractable fall arresters are ideal for work of low-rise because the blockage is almost instantaneous, limiting the required clearance. |
|
For the work on an inclined plane with fall arrester on anchor line, it is necessary that it be equipped with a manual locking system. |
| Standard(s): | EN353-2:2002 |
| Material: | Polyamide |
| Size: | |
| HS Code : | 56090000 |