Non Fire Forked Webbing Lanyard 1,5m from the range FIRE FREE with straps which resist to splashes of molten metal
Non Fire Forked Webbing Lanyard from the range FIRE FREE with straps which resist to splashes of molten metal
This energy absorbing webbing lanyard has been designed to offer a perfect solution for workers doing welding at height. We recommend its use for : shipbuilding, building steelwork, ...
- 44 mm wide webbing lanyard
- Length : 1,5 metre
- Connectors : 1 steel screw-karabiner FA 50 101 17 and 2 steel scaffold hooks FA 50 207 55
Compliance - Complies with the standards EN 354:2010, ISO 9150:1988 and ISO 15025:2005.
To download the lanyard instructions for use, see the Attachment tab
LANYARDS - RESTRAINT & WORK POSITIONING
|
EN354 : Connection elements or parts of a restraint system, these limit the range of movement of a user. Breaking strength > 22 kN
EN358 : A work positioning lanyard allows a user to maintain himself in tension (or in suspension) to a workstation with his hands free.
Breaking strength > 15 kN.
|
|
Use: The lanyards shall provide the worker with maximum security while causing least inconvenience possible to the user
- A restraint lanyard should be used only when you want to prevent a user from accessing an area where there is a risk of falling.
- The Forked lanyards are designed to be used in the same way but for passing intermediate anchor points.
- A work positioning lanyard could be used when there is no risk of falling, otherwise it must be used with a suitable fall arrest
system.
RAPPEL: Lanyards without the energy absorber should never be used as a fall arrest system
How to choose?
|
14 mm Polyamide twisted rope
|
30 mm Polyester webbing
|
12 mm Polyamide kernmantle rope
|
11 mm Polyamide kernmantle rope
|
|
To be used occasionally and/or for short-term use
|
To be used regularly and/or for long-term use
|
Whatever type of lanyard, the performances are identical, so it is above all a personal choice, but it must be based on the intensity of use.
When choosing the product it will be necessary to take into account the importance of connectors
Work positioning lanyard
Lanyard with a ring type adjuster, used when the operator's position remains the same throughout the work to be done. |
Lanyard with a progressive grip adjuster, used when the operator's position often changes throughout the work to be done. |
To ensure the performance of your lanyard it should be protected with a protective sleeve.