FREE BLAST - Antistatic energy absorbing webbing lanyard, lg. 2 m
FREE BLAST - Antistatic energy absorbing webbing lanyard with 2 connectors
- 44 mm wide webbing Energy Absorber which reduces the impact of the fall less than 6 KN
- Lanyard in polyester webbing, width 44 mm
Connectors - 1 aluminum scaffold hook double action, opening 60 mm, ref. FA 50 208 60 and 1 aluminum screw-locking karabiner, opening 22 mm, ref. FA 50 103 22
Materials:
Lanyard : polyester with antistatic properties
Absorber : polyamide and polyester with antistatic properties
Connectors : aluminum
Length - 2 mtrs (connectors included)
Compliance - EN 355:2002, EN1149-1:2006 (surface resistivity), ISO 80079-36 and ISO 80079-37.
Can be used in ATEX atmosphere (zone 1).
HS code - 56090090
To download the energy absorber instructions for use, see the Attachment tab
ENERGY ABSORBER & ENERGY ABSORBING LANYARDS
|
EN355 :
The energy absorbing lanyards allow to absorbs the energy of fall by tearing of specific webbings or sewings. Maximal length for a
energy absorbing lanyard : 2 m including connectors. Breaking strength > 15 kN
Lanyards without the energy absorber should never be used as a fall arrest system.
|
|
Use: To be used only for a work requiring limited movement and where the distance under the feet of the user is sufficient (see Clearance).The forked energy absorbing lanyards are designed to be used for passing intermediate anchor points.
Trades : Construction, Worker on building, Steel construction, Scenic, Scaffolder.
How to choose?
|
12 mm twisted rope
|
30 mm webbing
|
11 mm kernmantle rope
|
44 mm expandable webbing
|
12 mm special sharp edges kernmantle rope
|
|
FA 30 000 45 (45 mm)
To be used occasionally and/or for short-term use
|
FA 30 000 35 (35 mm)
To be used regularly and/or for long-term use
|
Whatever type of lanyard or energy absorber, the performances are identical, so it is above all a personal choice, but it must be based on the intensity of use.
- When choosing the product it is necessary to take into account the importance of connectors (see page 66).
|
COMPLIANCE WITH VG 11
KRATOS SAFETY launches Energy Absorbing Lanyards tested as per VG 11 from PPE Directive 89/686/EEC
KRATOS SAFETY makes it easier for you to pick the right Energy Absorbing Lanyard tested with all the components of connecting elements in combination, as faced in actual usage.
The VG 11 procedure allows to ensure the breaking strenght of the components (hooks and rope) and their assembly without fearing the breakage of any of the elements.
KRATOS SAFETY Forked Lanyards are also subjected to the special 3-point testing as laid down in the VG 11 Procedure to make the lanyards extra safe for use.
Minimum breaking strenght > 9kN at the 3 ends of the forked lanyard.
|
|
Fall indicator label:
Before each use, inspect your energy absorbing lanyard.
If the "NOT OK" sign is visible on the label, this means your device has arrested a fall and should not be reused. Please replace it by a compliant one.