GRAVITY-S, 2 m forked expandable energy absorbing lanyard with intermediate tie-back rings
GRAVITY-S, 2 m forked expandable energy absorbing lanyard with intermediate tie-back rings
Simplify your mobility with our GRAVITY-S tie-back energy absorbing lanyard.
It allows:
- Horizontal and vertical progression.
- A long lanyard use with its wide-opening connectors (60 mm), and a short lanyard use with the tie-back system, even on very large structures (max. dia. 70 cm).
- Easily pass intermediate points between several anchors.
- Facilitate the work of rescuers in the event of a rescue/evacuation.
Product highlights:
- Tie Back system, offering unrivalled flexibility to adapt to different situations in the workplace.
- Elastic webbing and swivels, offering maximum freedom for movement without compromising safety.
- Ultra compact energy absorber, reducing the impact of the fall to less than 6 kN, while guaranteeing optimum protection and minimum space requirement. Protected by a small zipper pouch, it is easily openable for internal control of the energy absorber webbing.
- Fall indicators, providing a visual alert in the event of a fall, for effective preventive maintenance.
- Sharp edge certification, to ensure your safety in a maximum of workplace environments.
- For a user with a weight up to 140 kg max.
Expanded length: 2 m
Relaxed length: 1.40 to 1.60 m
Weight: 2.03 kg
Conforms to: EN 355:2002, PPE-R 11.062, PPE-R 11.063, PPE-R 11.074
To download the User Instructions of the product, see the Attachment tab
ENERGY ABSORBER & ENERGY ABSORBING LANYARDS
|
EN 355 :
The energy absorbing lanyards allow to absorbs the energy of fall by tearing of specific webbings or sewings. Maximal length for an energy absorbing lanyard : 2 m including connectors. Breaking strength > 15 kN
Lanyards without the energy absorber should never be used as a fall arrest system.
|
|
Use: To be used only for a work requiring limited movement and where the distance under the feet of the user is sufficient (see Clearance).The forked energy absorbing lanyards are designed to be used for passing intermediate anchor points.
Trades : Construction, Worker on building, Steel construction, Scenic, Scaffolder.
How to choose?
|
12 mm twisted rope
|
30 mm webbing
|
11 mm kernmantle rope
|
44 mm expandable webbing
|
12 mm special sharp edges kernmantle rope
|
|
FA 30 000 45 (45 mm)
|
FA 30 000 35 (35 mm)
|
Whatever type of lanyard or energy absorber, the performances are identical, so it is above all a personal choice, but it must be based on the intensity of use.
- When choosing the product it is necessary to take into account the importance of connectors.
|
COMPLIANCE WITH VG 11
KRATOS SAFETY launches Energy Absorbing Lanyards tested as per VG 11 from PPE Directive 89/686/EEC
KRATOS SAFETY makes it easier for you to pick the right Energy Absorbing Lanyard tested with all the components of connecting elements in combination, as faced in actual usage.
The VG 11 procedure allows to ensure the breaking strenght of the components (hooks and rope) and their assembly without fearing the breakage of any of the elements.
KRATOS SAFETY Forked Lanyards are also subjected to the special 3-point testing as laid down in the VG 11 Procedure to make the lanyards extra safe for use.
Minimum breaking strenght > 9kN at the 3 ends of the forked lanyard.
|
|
Fall indicator label:
Before each use, inspect your energy absorbing lanyard.
If the "NOT OK" sign is visible on the label, this means your device has arrested a fall and should not be reused. Please replace it by a compliant one.