DIELECTRI - Forked dielectric energy absorbing webbing lanyards
DIELECTRI - Forked Dielectric Energy Absorbing Webbing Lanyards
Energy absorbing lanyard designed to protect operatos working in an environment with potential electrical hazards.
Length : 1.50 mtr
Connectors : 1 dielectric snap hook FA 50 223 15 at one end, and 2 dielectric rebar hooks FA 50 222 55 at the other end.
Conforms to : EN355:2002.
HS Code : 5609 00 90
- Energy absorber in 44 mm wide webbing to reduce the impact of the fall (less than 6 kN).
- Made up of 30mm wide polyester webbing.
To download the instructions for use, see the Attachment tab
ENERGY ABSORBER & ENERGY ABSORBING LANYARDS
EN355 :
The energy absorbing lanyards allow to absorbs the energy of fall by tearing of specific webbings or sewings. Maximal length for a energy absorbing lanyard : 2 m including connectors. Breaking strength > 15 kN
Lanyards without the energy absorber should never be used as a fall arrest system.
|
|
Use: To be used only for a work requiring limited movement and where the distance under the feet of the user is sufficient (see Clearance).The forked energy absorbing lanyards are designed to be used for passing intermediate anchor points.
Trades : Construction, Worker on building, Steel construction, Scenic, Scaffolder.
How to choose?
12 mm twisted rope
|
30 mm webbing
|
11 mm kernmantle rope
|
44 mm expandable webbing
|
12 mm special sharp edges kernmantle rope
|
FA 30 000 45 (45 mm) To be used occasionally and/or for short-term use
|
FA 30 000 35 (35 mm) To be used regularly and/or for long-term use
|
Whatever type of lanyard or energy absorber, the performances are identical, so it is above all a personal choice, but it must be based on the intensity of use.
- When choosing the product it is necessary to take into account the importance of connectors (see page 66).
COMPLIANCE WITH VG 11 KRATOS SAFETY launches Energy Absorbing Lanyards tested as per VG 11 from PPE Directive 89/686/EEC
KRATOS SAFETY makes it easier for you to pick the right Energy Absorbing Lanyard tested with all the components of connecting elements in combination, as faced in actual usage.
The VG 11 procedure allows to ensure the breaking strenght of the components (hooks and rope) and their assembly without fearing the breakage of any of the elements.
KRATOS SAFETY Forked Lanyards are also subjected to the special 3-point testing as laid down in the VG 11 Procedure to make the lanyards extra safe for use.
Minimum breaking strenght > 9kN at the 3 ends of the forked lanyard.
|
|
Fall indicator label:
Before each use, inspect your energy absorbing lanyard.
If the "NOT OK" sign is visible on the label, this means your device has arrested a fall and should not be reused. Please replace it by a compliant one.