KORI - Anchorage plate with swivel for trapezoidal roof sheet
KORI - Anchorage plate with swivel for trapezoidal roof sheet
Anchorage plate designed to be installed on trapezoidal roof sheets fixed on a trapezoidal roof sheet where the user needs to move around the anchorage to carry out their work.
To be fixed directly onto the purlin with the fasteners (pop rivets and steel timber tek screws) supplied.
Comes with EPDM waterproofing strips.
Swivel anchor eye with integrated energy absorber at the center of the plate.
Compatible with pitches from 200 mm to 260 mm on trapezoidal sheet.
Material: Stainless steel
Weight: 2.00 kg.
HS code: 73269098
Compliance: EN 795:2012 Type A
Static strength as per EN 795: 12 kN.
Minimum breaking strength: 15 kN
To download the product instructions for use, see the Attachment tab
ANCHORAGES
EN795 : The anchor point is a point where the fall arrest system is safely attached to ensure the security of the user. There are different kinds of anchor points:
Type A |
Anchoring device requiring the fixing of one more structural anchors |
Type B |
Anchoring device not requiring the fixing of one more structural anchors |
Type C |
Anchor device using horizontal flexible anchor lines |
Type D |
Anchor device using horizontal rigid anchor lines |
Type E |
Deadweight anchoring device |
Use : There is no good fall arrest system without a good anchorage point. Whatever the type of intervention to achieve and that it is temporary or regular, it is essential to correctly choose its anchor point and verify that the host structure (building, steel structure, tower, ...) is sufficiently resistant.
How to choose ?
The anchor point is undoubtedly the part of a fall arrest system that is tricky to choose to ensure optimum safety. When choosing the anchor point the first thing to do is to determine where to install it.
For this we must take into account the following aspects:
- static strength of the anchor point : > 12 kN
- installation height: high enough compared to the first potential obstacle in case of a fall (see fall factor diagram)
- situation: in the vertical workstation to avoid risks of pendulum effect (see pendulum effect diagram)
We will ensure as far as possible to focus on work situations with a fall factor 0 or 1 and we will avoid if possible installing a fall arrest system on an anchor in fall factor 2, The pendulum effect must also be as small as possible.
|
|
FALL FACTOR
|
|
|
Fall Factor 0 Position of the anchor point above the attachment point of the user
|
Fall Factor 1 Position of the anchor point at the same level as attachment point of the user
|
Fall Factor 2 Position of the anchor point above the attachment point of theuser |
In a representation of space in 3D symbolized this way: |
|
Key:
x = axis right / left
y = axis up / down
z = axis back / front
|
we created the 4 following pictograms in order to help you understand the direction in which the effort can be applied on our anchor points: |
|
This anchorage can be used only in a horizontal direction in relation to the installation. |
|
This anchorage can be used only in a vertical direction in relation to the installation. |
|
This anchorage can be used both in a horizontal and in a vertical direction in relation to the installation. |
|
This anchorage can be used in the 3 directions in relation to the installation. |