10 ft. Tripod, with double head-mounted pulley
10 ft. Tripod, with double head-mounted pulley
For access in confined spaces
Adjustable height: from 1.90 m to 2.90 m
Wheelbase: from 1.52 m to 2.05m
Weight: 22.35 kg
Maximum load Capacity: 500 kg under head / 250 kg on leg
Compliance: EN795:2012 type B, ATEX Directive 2014/34/EU, Machinery Directive, EN 1808
HS Code: 7616 9990 99
- With two double head-mounted pulleys at the head of the Tripod for passing the cable of the winch and the retractable fall arrester with integrated rescue winch.
- Having two auxiliary eye bolts as attachment points.
- Aluminum alloy cast head, legs in aluminium.
- Steel support-shoes provided with rubber sole to increase friction and impart more stability.
- Strength of anchorage point > 12 kN
- To be used in combination with the set of universal adaptation plates FA 60 101 02 for attaching our winch FA 60 003 20 / FA 60 003 30 / FA 60 023 20 / FA 60 023 20R.
- To be used in combination with the set of universal adaptation plates FA 60 101 01 for attaching our retractable fall arresters with integrated rescue winch FA 20 401 10/S, FA 20 401 20/R/S, FA 20 401 30/S.
- Every Tripod is provided with Tripod Bag
To download the Tripod instructions for use, see the Attachment tab
ANCHORAGES
EN795 : The anchor point is a point where the fall arrest system is safely attached to ensure the security of the user. There are different kinds of anchor points:
| Type A |
Anchoring device requiring the fixing of one more structural anchors |
| Type B |
Anchoring device not requiring the fixing of one more structural anchors |
| Type C |
Anchor device using horizontal flexible anchor lines |
| Type D |
Anchor device using horizontal rigid anchor lines |
| Type E |
Deadweight anchoring device |
Use : There is no good fall arrest system without a good anchorage point. Whatever the type of intervention to achieve and that it is temporary or regular, it is essential to correctly choose its anchor point and verify that the host structure (building, steel structure, tower, ...) is sufficiently resistant.
How to choose ?
The anchor point is undoubtedly the part of a fall arrest system that is tricky to choose to ensure optimum safety. When choosing the anchor point the first thing to do is to determine where to install it.
For this we must take into account the following aspects:
- static strength of the anchor point : > 12 kN
- installation height: high enough compared to the first potential obstacle in case of a fall (see fall factor diagram)
- situation: in the vertical workstation to avoid risks of pendulum effect (see pendulum effect diagram)
|
We will ensure as far as possible to focus on work situations with a fall factor 0 or 1 and we will avoid if possible installing a fall arrest system on an anchor in fall factor 2, The pendulum effect must also be as small as possible.
|
|
FALL FACTOR
|
|
|
|
Fall Factor 0
Position of the anchor point above the attachment point of the user
|
Fall Factor 1
Position of the anchor point at the same level as attachment point of the user
|
Fall Factor 2
Position of the anchor point above the attachment point of theuser |
| In a representation of space in 3D symbolized this way: |
|
Key:
x = axis right / left
y = axis up / down
z = axis back / front
|
| we created the 4 following pictograms in order to help you understand the direction in which the effort can be applied on our anchor points: |
|
This anchorage can be used only in a horizontal direction in relation to the installation. |
|
This anchorage can be used only in a vertical direction in relation to the installation. |
|
This anchorage can be used both in a horizontal and in a vertical direction in relation to the installation. |
|
This anchorage can be used in the 3 directions in relation to the installation. |